Thermal insulation is essential to improve the quality and environmental comfort within a building.Insulation reduces unwanted heat losses resulting in lower energy consumption and smaller HVAC systems.

STYROPAN XPS - used for floors, terraces and roofs which are laid underneath concrete/screed. XPS can also be placed on external walls and inside cavity walls. Thicknesses available: 30, 50, 80mm. Thermal U Value: 1.10, 0.7, 0.47 W/m2K.

YTONG BLOCKS - used both for loadbearing and partition walls. SISMICO Block is a loadbearing block with a compressive strength of 5 MPa and a U-value of 0.6 W/m2K for a thickness of 240mm. STANDARD Block is a non-loadbearing block used for partitions and cavity walls. Available in 100 and 150mm thickness with U-values of 0.152 and 0.137 W/m2K respectively.

YTONG MULTIPOR - the 60mm thick mineral insulation boards are ideal for interior thermal insulation on external walls. Being a non-combustible material, the board offers excellent fire protection. Multipor boards can be used in any existing and new structures such as residential, commercial and public buildings.

KELYFOS - a certified external thermal insulation composite system consisting of extruded polystyrene boards, adhesives, plasters and other materials such as fiberglass mesh. The system is applied on external walls of both new and existing buildings. Kelyfos system reduces the heat loss by up to 55% and offers protection to buildings against ever changing weather conditions.

KELYFOSROOFTILE - a composite thermal insulation tile consisting of an XPS insulation layer (50/60/80mm) with a cement mortar surface finish of 20mm thickness. The tiles are light and appropriate for flat roofs.

EVG-3D - an innovative building system for both residential and industrial buildings. EVG-3D consists of panels which can be used both as loadbearing and non-loadbeairng, offering high strength and rigidity.

All these are available from J M Vassallo Vibro Steel Limited.